ICE LED 1.0 - 1.1
Installation instructions
Ø
0.79"
corrugato
T 40°
Ta 25°
IP67
compliance
RoHS
LED
TECH
WARNING!!!
Please read the following instructions carefully.
IMPORTANT:
•
Although LED runs on a very low voltage, always cut off the power sup-
ply before installing the LED light or subjecting it to maintenance.
•
Unauthorised alterations or tampering of the product will invalidate all
the conditions of guarantee.
•
This fixture must be istalled by a qualificate electrician.
•
Designplan Lighting
is not resposable if its fixtures are not
installed in
according to local safety standards.
•
Data contained in this document may be changed at any moment with-
out prior notice and do not place
Designplan Lighting
under any
implicit or
explicit obligation.
ELECTRICAL CONNECTIONS:
•
LED lights run at constant current.
•
LED lights must be
connected in series
respecting polarities.
•
As for the choice of the power supplies, please consider the current
through which they are feeded and the max power consumption of
LEDs you have to install.
•
The total number of LEDs to be feeded must be counted for each single
spot (e.g. 2 spots with 3 LEDs 1W each= 6 LEDs 1W in all= 6W).
•
The system must be feeded only if all the spots are connected.
The
connection of the single spots with the power supply in voltage may get
the spot broken due to over-tension in vain.
•
The power supplies must be installed in aerated rooms, far from heat
sources. A situation of overworking or a lack of air circulation will not
permit a natural dissipation.
•
The electronic power supply is current-stable, therefore it partially com-
pensates the voltage-drop problems related to the cable length;
anyhow we suggest not to overcome 30 metres.
•
Never use switches on secondary circuit.
NOTES:
•
Wire connections must be realized with self amalgamating
scotch or similar.
!
ICE LED 1.0
ICE LED 1.1
Designplan Lighting, Inc., 79 Trenton Ave., Frenchtown NJ, 08825. T.908-996-7710 F.908-996-7042
Designplan Lighting, Inc., 79 Trenton Ave., Frenchtown NJ, 08825. T.908-996-7710 F.908-996-7042
1.57"x1.57"
2.36"x2.36"
2.01"
2.01"
