79 Trenton Avenue, Frenchtown NJ 08825
© Copyright 20
20
Designplan Lighting, Inc.
installation instructions
3
of
7
FLAI
P: 908-996-7710
F: 908-996-7042
single touch - ON »dimmer 20% »50% »
»100% »50% »20% »OFF
long press - OFF
magnetic connection
force
of attraction max
4.41 lbs
To correctly charge the lamp, we recommend that you:
INSTRUCTIONS:
Charge the battery before initial use. To turn the light ON
and OFF, touch the circular mark on the edge of the
module. The maximum load held by the magnetic joint is
equivalent to
2.20 lbs
. The magnetic elements in this
product cannot be used for purposes other than the original
one. Do not approach the magnetic element to products
easily demagneti
z
able.
IMPORTANT:
The integrated battery has an overload protection function. Please refer to local laws for the proper disposal
and recycling of the battery. The light source for this fitting must only be replaced by the manufacturer or its
technical team.
MAINTENANCE:
Use a slightly-wet cotton cloth for cleaning. In case of defective charge, clean the golden plates with a soft
cloth (do not use hard or abrasive materials). In case of malfunction or damage, please contact
you supplier
directlly.
1.
Connect the USB to the adapter.
2.
Magnetically attach the charger head to the concavity on the lighting module, placing the two pins on the
golden plates.
3.
Put the plug into the electrical socket.
4. When fully charged, disconnect the plug from the electrical socket and remove the charger.
Included: INPUT AC110-240V 50/60Hz - OUTPUT 5V 2A
