8
Figure 16
Figure 17
10. INSTALLING THE
LIGHT KIT
NOTE: B e f o r e s t a r t i n g i n s t a l l a t i o n ,
disconnect the power by turning off
the circuit breaker or removing the
fuse at fuse box. Turning power off
using the fan switch is not sufficient to
prevent electric shock.
1. While holding the light kit assembly
under your fan, snap together the
wire connection plugs .
2. Carefully push all wires back into the
switch housing, then install the light
k i t a s s e m b l y o n t o t h e m o u n t i n g
plate with 3 screws provided. Be
sure to tighten all screws. (Fig. 16)
Connection plugs
Light kit
assembly
Screws
Mounting
plate
11. INSTALLING THE
LIGHT BULBS & GLASS
SHADE
1. Install 3 x 40w candelabra bulbs (not
included). (Fig. 17)
2. Place glass shade over the light kit
stem, secure with th rubber washer,
m e t a l n u t , g l a s s c a p a n d
decorativenut. Do not overtighten.
(Fig. 17)
3. Restore power and your light kit is
ready for operation.
Bulbs
Light kit
Glass shade
assembly
Decorative nut
Metal nut
Rubber washer
Glass cap
