PROGRAMMING YOUR DIFFUSER:
⬥
Connect the adapter to the unit and power source
Diffuser will power on when it connects to the adapter and can
also be powered on
and off by holding down the ENT key or using
the on/off switch on the side of the diffuser.
The LCD screen will turn off after 1 minute of inactivity; unit will
still continue to operate as programmed. Press any key to light
the screen.
TO SET YOUR PASSWORD:
⬥
Press and hold the ENT and BACK keys for approximately 3
seconds
⬥
Input the desired password or bypass this step and press the
ENT key
⬥
Repeat the password and press ENT key to save the setting, or
just hit the ENT key to move to the next screen
Note: When setting the password, the RIGHT arrow key will move
the cursor to the right, the UP arrow key will set the desired
number.
!
4
