MP SERIES: INSTALLATION & OPERATION MANUAL
PAGE 2
The inDESIGN MP30 – 30 watt, all-in-one mixer amplifier is
designed for small to medium installations where multiple
playback sources are required. The in-built FM Tuner & USB/SD
MP3 player allow easy playback of your favourite FM station,
or music stored on a USB drive or SD card.
The MP30 delivers 30 watts via 8Ω or constant voltage 100V
and 70V speaker outputs and features 2 Microphone/Line
inputs with individual gain control for external audio sources
and microphones.
The MP series feature 2 Mic/Line inputs. The MP Series provide
either 4 Ohm or constant voltage 100V speaker outputs. A ‘pre-
amp out/power amp in’ link allows for the mixer audio signal to
be sent to an external equaliser or a booster amplifier.
INTRODUCTION
INTRODUCTION
2
IMPORTANT SAFETY
INSTRUCTIONS
3
INSTALLATION
5
FRONT PANEL
6
REAR PANEL
7
BLOCK DIAGRAM:
8
SPECIFICATIONS
9
WARRANTY INFO 10
CONTENTS
Electrical and Safety Warnings
THESE SERVICE INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY.
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING
OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS
UNLESS YOU ARE QUALIFIED TO DO SO.
CAUTION
The lightening flash with arrowhead
symbol, with an equilateral triangle,
is intended to alert the user to the
presence of un-insulated
“dangerous voltage” within the products
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRICAL SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
