P
ause Jul
y 2010
Components Included
PAUSE BED FRAME
• 1 x Headboard
• 1 x Headboard tie rail
• 1 x Centre rail
(Evo™ pins pre-installed in rails)
• 2 x Side rails
(Evo™ pins pre-installed in rails)
•1 x Tailboard tie rail
• 12 x M6 bolts
• 12 x M8 metal dowels
• 12 x Metal housings
• 12 x M8 nuts
• 12 x Cover caps
• 1 x M8 spanner
• 1 x 4mm allen key
• 4 x Velcro cable ties
• 4 x Cup washers
• 4 x Screws
• 4 x Leg brackets
• 4 x Legs
• 2x Shelves
Once you have unpacked the components, lay out the bed as shown.
1
2
3
4
Side rail (R)
Leg
Centre rail
Tailboard
Headboard
Shelf
Side rail (L)
Screw M8 metal dowels into threads in headboard tie rail as shown. Slide side rails
into headboard tie rail.
Insert metal housings into holes in the side rail. Attach nuts to dowels. Using
the spanner provided, tighten in a clockwise direction.
Attach tailboard tie rail in same manner as headboard tie rail. (steps 2 -4)
Attach cover caps over fittings.
NOTE:This bed is in “knockdown” form to avoid possible transport damage and to allow
movement into restricted areas such as stairways.
WARNING: This headboard is very heavy it is recommend that it is a two person lift.
• 2 x Cross braces
(Cross brace brackets
preinstalled on rails, cross braces packaged
with slats)
• 2 x Boxes of slats
