________________________________________________________________________________________________
__________________________________________________________________________________________________________
Operator Manual for TACT TA-4800 in NSW National Parks & Wildlife Service User Mode G/00123B Issue 1 Page 10
HOOK FLASH
A Hook flash (also called ‘Recall’ or timed loop break) is used to facilitate PABX and electronic exchange
functions such as transfer, hold and recall.
For TACT To Generate a Hook Flash (Timed Loop Break)
1.
Press * 6.
LOCAL TELEPHONE (OPTIONAL)
The local telephone is a ‘master terminal’ that can be used as a monitor, a paging terminal, a central point of
contact for field units, a terminal to place calls for mobiles and a terminal to intercept and screen incoming
calls to be patched through to the field. In addition, field units can contact the office staff by ringing the local
telephone. Telephone calls on the local telephone can either be private or broadcasted.
Calling the Local Telephone from a Mobile
1.
Press * 90 #.
Calling a Mobile from the Local Telephone
1.
Lift handset and voice call or page mobile.
To Turn On Local Telephone Privacy Mode
1.
Press * 91 1 #.
To Turn Off Local Telephone Privacy Mode
1.
Press * 91 0 #.
All other programming from the local telephone is identical to that from a mobile or remote telephone.
CALL BARRING
(
Not yet implemented
)
The only easy way of restricting mobile users from dialing outside local or long distance numbers is to limit
the number of digits that they are allowed to dial. Please note that emergency numbers are always allowed
(000, 111, 911, 112, 999, etc.). For more comprehensive call barring, use the barring facilities of your PABX
or your telephone company.
To Set the Number of Digits that can be dialed from a Mobile
From the Keypad of TACT only:
1.
Press * 59 nn #, where nn can be 00-24.
2.
To check the number of digits allowed, press * 59 #.
