DESi Smartline, User Manual

Page: 8 / 12

8
3.
KEYPAD
(
Sold Separately
)
3. 1
Arm:
First press
MENU
then press
ARM
button.
3.2
Disarm:
Enter your 4-digit password and press DISARM. (Factory set password is 0000)
3.3
Special Arming Type-1
:
First press
MENU
then to
STAY
button.
(
In this type of arming, zone 2 is disabled according
to the factory settings
.)
3.4
Special Arming Type-2
:
First press MENU then press twice to STAY button. (In this type of arming, zone 3 is
disabled according to the factory settings.)
3.5. Keypad Settings
3.5.1. Admin Password:
It is the password for creating other passwords and arm/disarm the system. Factory set
password is 0000. To change this password, follow the instructions below when the alarm
is disarmed:
“MASTER PASSWORD” → MENU → 5 → 0 → “NEW PASSWORD” → AREA → “NEW
PASSWORD”
→
AREA
After this process, you will hear warning tone and the administrator password will be
changed.
3.5.2. User Passwords:
to disarm the alarm. You can set 7 different user passwords. To do this, follow the
instructions below when the alarm is disarmed:
Setting the first user password
“MAS. PASSWORD” → MENU → 5 → 1 → “NEW PASSWORD” → AREA → “NEW
PASSWORD” → AREA
Setting the fifth user password
“MAS. PASSWORD” → MENU → 5 → 5 → “NEW PASSWORD” → AREA → “NEW
PASSWORD” → AREA After this process, you will hear warning tone and the user
password will be created.
3.5.3. Pani c Password :
This password is used when malicious people want to disarm the alarm
by threat. If the system has been disarmed with a panic password, it will call the phone
numbers which entered at setup. This feature only available in voice caller module
included models. To define this password, follow the instructions below when the alarm is
disabled:
“MAS. PASSWORD” → MENU → 5 → 8 → “NEW PASSWORD” → AREA → “NEW
PASSWORD”
→
AREA