10
4. SETTINGS FOR MOTORIZED KNOB
IMPORTANT NOTE:
You can change the settings of knob
through keypad if it is enrolled as master controller to the knob.
4.1. Enrolling Wireless Controllers to the Motorized Knob
- Wake the keypad up by putting your palm to the touch keys and
than touch to “M” button. “A” appears on the display.
- Enter 5 digit master password. After display animation, touch to
“6” button. The knob will give a long (5 sec) and a short warning
tone one after the other.
- Just after short warning tone, send a rf signal from the device
you want to enroll to the knob till you hear 2 warning tones from
the cylinder.
In this way, the new controller will be enrolled to the knob.
For sending rf signal from controllers, please see the next page.
