background image

 
Remember! This motor can stop at any time, for a variety of reasons. Do not fly 
your plane in a way that damage or harm will result if the motor stops running. If 
you cannot safely fly your plane if the engine stops for any reason, do not fly the 
plane. 
Desert Aircraft will not be responsible for damage caused in engine–out situations. 
  

  

 

                          DA50 WARRANTY 

 

Your DA50 motor and ignition system are covered with a 3 year warranty 

by Desert Aircraft, starting from the date of purchase. 

 

  This warranty covers defects in workmanship and materials only. 

  We strongly recommend to not disassemble the motor or ignition system.  Improper disassembly or 

assembly of the motor or ignition system will void the warranty on that item.  

  Any modifications to the motor, or the ignition system, other than those authorized by Desert Aircraft, 

will void this warranty. 

 

    

This warranty does not cover the following: 

 

  Shipping expenses to and from Desert Aircraft for warranty service. 

  Damage caused by improper handling, operation, or maintenance. 

  Damage caused by a crash, whether the engine stopped running or not. 

  Damage caused by using improper fuel or additives. 

  Damage incurred during transit to Desert Aircraft.  

WRAP AND PACK ENGINE CAREFULLY!!

 

 

NOTE: 

 

DESERT AIRCRAFT WILL NOT SHIP ANY  WARRANTY  REPLACEMENT    

             ITEMS UNTIL THE POSSIBLY  DEFECTIVE  ITEMS  IN QUESTION ARE   
            RETURNTEND  TO ,  RECEIVED,  AND DEEMED DEFECTIVE BY 
            DESERT AIRCRAFT. 

 

 

 
 
 
 
DESERT AIRCRAFT 

1815 S. Research Loop                              
Tucson, AZ  85710  USA 
Ph 520 722 0607  Fax 520 722 5622 
Email  

[email protected]

  

Web    

www.desertaircraft.com

  

 
 
                                                                  
                                                                    

8

                                                             

Summary of Contents for DA50R











Reviews: