DESCO WEST
- 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178
DESCO EAST
- One Colgate Way, Canton, MA 02021-1407 • (781) 821-8370 • Website:
TB-8002
Page 2 of 5
© 2015 DESCO INDUSTRIES, INC.
Employee Owned
Features and Components
A. Power Switch:
Toggle the switch up to turn the
ionizer ON. Toggle the switch down to turn the ionizer
OFF.
B. Balance Adjustment:
Remove the cap to expose
the balance offset voltage adjustment potentiometer.
Turn the potentiometer clockwise for positive
adjustment. Turn the potentiometer counter-clockwise
for negative adjustment.
C. Rate Adjustment:
Remove the cap to expose
the rate adjustment potentiometer. The rate or pulse
frequency can be adjusted down to one pulse per
second or up to 20 pulses per second. Turn the
potentiometer clockwise to increase the rate. Turn the
potentiometer counter-clockwise to decrease the rate.
D. Power LED:
Illuminates blue when the ionizer is
powered ON.
E. Pulse Rate LEDs:
Illuminates red when positive ions
are emitted and green when negative ions are emitted.
Installation
Place the unit at a desired location where the airflow
will not be restricted. Ensure that the power switch is
set to OFF. Connect the ionizer’s power cord into an
appropriate AC power source.
Operation
1. Position the ionizer so that maximum airflow is
directed towards the items or area to be neutralized.
2. Turn the unit ON. The power LED will illuminate
and remain solid. The pulse rate LEDs will blink
during normal operation.
Figure 2. Trustat Bench Top Ionizer features and
components
A
B C
D
E
Figure 3. Using the Trustat Bench Top Ionizer at a
workstation
