TY
PE
‘D’
LR
20
TY
PE
‘D’
LR
20
TR-0035-RX
TY
PE
‘D’
LR
20
TY
PE
‘D’
LR
20
TR-0035-RX
© 2004 DESA Specialty Products™
598-1172-00
This package includes (Style of pushbutton and chime may vary from illustration):
•
Wireless chime cover
•
Wireless chime base
•
Wireless pushbutton w/battery
•
Hardware pack
You'll need to buy 3 “D” alkaline batteries for the chime.
In typical use, alkaline batteries will
last up to three years.
Wireless Chime
Chime Base
Chime
Cover
Battery Cover
2.
Remove Chime Cover (see page 4).
Press down on
imprinted arrows and slide battery cover to remove.
1.
Install alkaline type A23 12 volt pushbutton battery.
Remove back of case by pushing in tab on bottom with
a small screwdriver. Make sure battery is oriented prop-
erly (see page 3).
3.
Install 3 alkaline “D”
batteries.
Make sure
batteries are oriented
properly.
4.
Test range.
Temporarily position chime and pushbutton
where you want them mounted. Press pushbutton to
verify chime and pushbutton work properly. If chime
does not sound, see Troubleshooting.
5. Mount pushbutton and chime.
Use either screws or double sided tape to mount pushbutton.
To mount with screws, remove back of case by pushing in tab
on bottom with a small screwdriver.
Attach back of case to door jamb or wall. Snap front of
pushbutton on.
Mounting Holes
TYPE ‘D’
LR20
TYPE ‘D’
LR20
TYPE ‘D’
LR20
