![background image](http://html.mh-extra.com/html/desa/vv42nb/vv42nb_owners-operation-and-installation-manual_2486183024.webp)
111906-01E
For more information, visit www.desatech.com
For more information, visit www.desatech.com
24
5
4
Figure 49 - Installing Log No. 5
Figure 48 - Installing Log No. 4
INSTALLING LOGS, LAVA ROCK AND
GLOWING EMBERS
Each log is marked with a number. These numbers will help you
identify the log when installing. It is very important to install these
logs exactly as instructed. Do not modify logs. Only use logs
supplied with fireplace.
Open louvers, remove screen, unlock door latches, and open glass
door. See
Removing/Replacing Glass Door
, steps 1 and 2 on page 22.
Install logs according to instructions for fireplace model numbers.
1.
Place log #1 (base log) onto pin on left front side of grate as
shown in Figure 45.
2.
Rest left side of log #2 (front log) onto top of log #1. Place right side
of log onto second pin located on right side of grate (see Figure 46).
3.
Place log #3 (rear log) onto pins on rear of grate as shown in
Figure 47.
4.
Place log #4 (crossover log) onto pins from both logs #2 and
#3 as shown in Figure 48.
5.
Place log #5 (top log) onto right pin of front log (#2) and the
smooth surface of crossover log (#4) as shown in Figure 49.
Make sure it is seated properly.
FIREPLACE INSTALLATION
Continued
FIREPLACE INSTALLATION
Installing Logs, Lava Rock and Glowing Embers
1
1
2
Figure 45 - Installing Log No. 1
Figure 46 - Installing Log No. 2
Figure 47 - Installing Log No. 3
3