![background image](http://html.mh-extra.com/html/desa/vanguard-vsgf33nr/vanguard-vsgf33nr_owners-operation-and-installation-manual_2486438003.webp)
3
107171
OWNER’S MANUAL
For more information, visit www.desatech.com
PRODUCT
IDENTIFICATION
Figure 1 - Log Base Assembly, Split Oak Set
Figure 2 - Fireplace
Top Louver
Assembly
Fireplace
Hood
Bottom
Louver
Assembly
Screen
Assembly
Top Outer
Casing
Firebox Support
Optional Blower
Assembly
(Not Included)
AU
TO
ON
OF
F
CO
OL
ER
W
AR
ME
R
TE
MP
Rear Log
Optional Remote
Control
Rear
Burner
Crossover Log
Middle Log
Front Log
LOCAL CODES
Install and use fireplace with care. Follow all
local codes. In the absence of local codes, use
the latest edition of The National Fuel Gas
Code ANS Z223.1, also known as NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
UNPACKING
1.
With utility knife, cut the carton all the
way around above the staples on the
bottom tray. Lift the carton off the
heater. Remove packing.
Note:
The
hood is located in the packing on the
right hand side of the heater front. Lift
the heater off the bottom tray.
2.
Locate two screws above top corners
of the fireplace screen. Remove and
discard these screws. Lift fireplace
screen up and pull out to remove.
3.
Remove protective packaging applied to
logs, log base assembly, and fireplace.
4.
Remove fireplace hood from carton
insert.
5.
Check all items for any shipping dam-
age. If damaged, promptly inform
dealer where you bought fireplace.
Front Burner
WARNING: Do not remove
the metal data plates attached to
the heater base assembly. The
data plates contain important
warranty information.