manualshive.com logo in svg

Desa Vanguard VN2000BA, Owner'S Operation And Installation Manual

Share
Download
Desa Vanguard VN2000BA Owner'S Operation And Installation Manual Download Page 1

VENT-FREE NATURAL GAS HEATER

OWNER’S OPERATION AND INSTALLATION MANUAL

Save this manual for future reference.

Models: VN2000BA, VN2000BTA, and VN2800BTA

®

WARNING: If the information in this manual is not followed exactly, a fire or
explosion may result causing property damage, personal injury, or loss of life.

— Do not store or use gasoline or other flammable vapors and liquids in the

vicinity of this or any other appliance.

— WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor’s phone. Follow the

gas supplier’s instructions.

• If you cannot reach your gas supplier, call the fire department.

— Installation and service must be performed by a qualified installer, service

agency, or the gas supplier.

®

Summary of Contents for Vanguard VN2000BA





































Reviews:

No comments

Brands by name

Popular brands

Load more brands