background image

UNVENTED (VENT-FREE) GAS
STOVE HEATER

OWNER’S OPERATION AND INSTALLATION MANUAL

For more information, visit www.desatech.com

For more information, visit www.desatech.com

Save this manual for future reference.

Save this manual for future reference.

Model (F)SVYD18N/P Series Variable Manual Control or Model (F)SVYD18NR/PR Series

Remote-Ready Control Gas Log Heater (Burner System For Cast Iron Stoves)

WARNING: If the information in this
manual is not followed exactly, a fire or
explosion may result causing property
damage, personal injury, or loss of life.

— Do not store or use gasoline or other

flammable vapors and liquids in the
vicinity of this or any other appliance.

— WHAT TO DO IF YOU SMELL GAS

Do not try to light any appliance.

Do not touch any electrical switch;
do not use any phone in your build-
ing.

Immediately call your gas supplier
from a neighbor’s phone. Follow
the gas supplier’s instructions.

If you cannot reach your gas sup-
plier, call the fire department.

— Installation and service must be per-

formed by a qualified installer, service
agency, or the gas supplier.

WARNING: Improper installation, adjustment, al-
teration, service, or maintenance can cause injury
or property damage. Refer to this manual for cor-
rect installation and operational procedures. For
assistance or additional information consult a quali-
fied installer, service agency, or the gas supplier.

WARNING: This is an unvented gas-fired heater.
It uses air (oxygen) from the room in which it is
installed. Provisions for adequate combustion
and ventilation air must be provided. Refer to 

Air

for Combustion and Ventilation section on page
4 of this manual.

WARNING: The SVYD18N/P(R) series vent-
free gas log heater is only approved for use in
the SCIVF(*) series, PSCIVF(*) series, or
NSCIVF(*) series cast iron stove models. The
FSVYD18N/P(R) series vent-free gas log
heater is only approved for use in the FC(*) and
PFC(*) series cast iron stove models.

(* Indicates Color Suffix Designation)

This appliance may be installed in an aftermarket*, permanently located, manufactured (mobile)
home, where not prohibited by local codes.
This appliance is only for use with the type of gas indicated on the rating plate. This appli-
ance is not convertible for use with other gases.

* Aftermarket: Completion of sale, not for purpose of resale, from the manufacturer

Amity™

Sheraton™

Townsend™

Patent Pending

Summary of Contents for SVYD18NR Series





































Reviews: