background image

IMPORTANT: Read and understand this manual before assembling, starting or servicing
heater. Improper use of heater can cause serious injury. Keep this manual for future reference.

Heater Sizes: 35,000  70,000  100,000  150,000 Btu/Hr

Models: B35CEB, B70CEB, B100CEB, and B150CEB

PORTABLE FORCED
AIR HEATERS

OWNER’S MANUAL

R

TABLE OF CONTENTS

SAFETY INFORMATION ............................................................ 2

PRODUCT IDENTIFICATION ..................................................... 3

UNPACKING ............................................................................... 3

FUELS ......................................................................................... 3

ASSEMBLY ................................................................................. 4

VENTILATION ............................................................................. 4

THEORY OF OPERATION ......................................................... 4

OPERATION ............................................................................... 5

STORING, TRANSPORTING, OR SHIPPING ............................ 5

PREVENTATIVE MAINTENANCE SCHEDULE ......................... 6

TROUBLESHOOTING ................................................................ 7

SERVICE PROCEDURES .......................................................... 8

WIRING DIAGRAMS ................................................................. 13

SPECIFICATIONS .................................................................... 13

ILLUSTRATED PARTS BREAKDOWN AND PARTS LIST ....... 14

WHEELS AND HANDLES ........................................................ 22

ACCESSORIES ........................................................................ 22

EC CONFORMITY DECLARATION .......................................... 23

WARRANTY INFORMATION ...................................... Back Cover

Summary of Contents for Master B100CEB

























Reviews: