GMC26F and GMC27U Hardwood
GMC28F Oak
Prestige Mantel
Assembly Instructions
IMPORTANT: Read entire instruction sheet before assembling or installing mantel kit.
This mantel is only approved for use with RF(N/P)28T and RF(N/P)30T series Natural
and Propane models. Do not use mantel with any other product.
This mantel kit contains the following pieces:
Part No.
Qty.
GMC26F
GMC27U
GMC28F
1
Left leg
103755-01
103755-02
103755-11
1
Right leg
103755-03
103755-04
103755-12
1
Header
103755-05
103755-06
103755-13
1
Top
103755-07
103755-08
103755-14
1
Base
103755-09
103755-10
103755-15
1
Hardware package
101223-02
101223-02
101223-02
2
Hardware bracket
103680-01
103680-01
103680-01
2
Mounting blocks
101527-01
101527-01
101527-01
The hardware package contains the following:
11
1 1/4" screws
2
1 3/4" screws
2
3" wood screws (not required)
Tools required:
#2 Phillips screw driver (regular length)
If any of these pieces are missing or dam-
aged, contact the dealer where you pur-
chased this kit or DESA International at 1-
800-972-7879 for referral information.
WARNING: Use care when
finishing an unfinished mantel.
Finish pieces before assembly.
Do not finish mantel pieces near
running heater or open flame. Va-
pors from most finishing prod-
ucts are highly flammable. Fol-
low manufacturer’s guidelines
when using finishing products.
IMPORTANT:
If you are painting an unfin-
ished mantel, apply an oil base undercoat to
the mantel before painting. This will seal the
wood. After undercoat dries completely,
lightly sand and apply an oil base top coat.
If you do not apply an oil base undercoat and
topcoat, the wood grain will bleed through
the paint.
Note:
Place all mantel pieces together be-
fore actually assembling mantel.
WARNING ICON
G 001
WARNING
Only use 1 1/4" screws to assemble header and
top. Damage to the mantel will result if the longer
screws provided are used for this purpose.
