![background image](http://html1.mh-extra.com/html/desa/fdlcr18/fdlcr18_owners-operation-and-installation-manual_2485863003.webp)
901265-01G
For more information, visit www.desatech.com
For more information, visit www.desatech.com
3
3
SAFETY INFORMATION
PRODUCT IDENTIFICATION
LOCAL CODES
UNPACKING
OPTIONAL PRODUCT FEATURES
PRODUCT IDENTIFICATION
Figure 1 - Product Identification (Dual Burner Shown)
Hearth Kit Model _________________________
Serial Number ___________________________
Log Set Model ___________________________
SAFETY INFORMATION
Continued
Grate
Burner
Pan
Burner
Manifold
Burner Inlet
Fitting
Burner
Clamp
Grate Steps
UNPACKING
CAUTION: Do not remove the data plates from the
burner pan. The data plates contain important prod-
uct information.
1.
Remove logs, hearth kit, pan materials, and hardware from carton.
2.
Remove all protective packaging applied to logs and base for
shipment.
3.
Check all items for any shipping damage. If damaged, promptly
inform dealer where you bought the product.
LOCAL CODES
Install and use log set with care. Follow all local codes. In the absence
of local codes, use the latest edition of The National Fuel Gas Code
ANSI Z223.1/NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
OPTIONAL PRODUCT
FEATURES
ON/OFF SAFETY VALVE/PILOT KIT AND
PROPANE/LP CONVERSION
An optional valve/safety pilot kit with a piezo ignitor is available for
this appliance. This system requires no matches, batteries, or other
sources to light. You must use this optional system for LP conver-
sion. See Accessories, page 15.
REMOTE CONTROL READY (MILLIVOLT)
SAFETY VALVE/PILOT KIT
An optional millivolt valve/safety pilot kit with a piezo ignitor is
available for this appliance. This system requires no matches, batteries,
or other sources to light. This system may be connected to a wall switch
or hand-held wireless remote control. See Accessories, page 15.
REMOTE CONTROL ACCESSORIES
There is an optional hand-held ON/OFF remote control that can be
purchased separately for this log set. You must use the millivolt
valve/safety pilot kit to use remote accessories with this appliance.
See Accessories, page 15.
A wall switch is also available for this appliance. You must use the
millivolt valve/safety pilot kit to use the wall switch with this
appliance. See Accessories, page 15.
11. Do not run log set
• where flammable liquids or vapors are used or stored
• under dusty conditions
12. Do not burn solid fuel in the fireplace after installing the log set.
Do not use this log set to cook food or burn paper or other objects.
13. Log set becomes very hot when in use. Keep children and adults
away from hot surface to avoid burns or clothing ignition. Log
set will remain hot for a time after shutdown. Allow surface to
cool before touching.
14. Carefully supervise young children when they are in the room
with log set.
15. Do not use appliance if any part has been exposed to or under
water. Immediately call a qualified service technician to inspect
the room appliance and to replace any part of the control sys-
tem (if using GA9050A or GA9150A) and any gas control which
has been under water.
16. To help prevent breakage, new logs must be broken-in (see
Curing Logs page 10).
17. Turn log set off and let cool before servicing, installing, or repair-
ing. Only a qualified service person should install, service, or re-
pair log set.
18. Provide adequate clearances around air openings.