background image

WARRANTY AND REPAIR SERVICE

KEEP THIS WARRANTY

Van Cranenbroek B.V. warrants this product and any parts thereof, to be free from defects in materials and workmanship
for six (6) months from the date of first purchase when operated and maintained in accordance with instructions. This
warranty is extended only to the original retail purchaser, when proof of purchase is provided.

This warranty covers only the cost of parts required to restore the product to proper operating condition. Transportation and
incidental costs associated with warranty parts are not reimbursable under this warranty.

This warranty does not cover defects resulting from misuse, abuse, negligence, accidents, lack of proper maintenance,
normal wear, alteration, modification, tampering, contaminated fuels, repair using improper parts, or repair by anyone other
than an authorized dealer or service center. Routine maintenance is the responsibility of the owner.

This express warranty is given in lieu of any other warranty either expressed or implied, including warranties of
merchantability and fitness for a particular purpose.

Van Cranenbroek B.V. assumes no responsibility for indirect, incidental or consequential damages.

LIMITED WARRANTY

We reserve the right to amend these specifications at any time without notice. The only warranty applicable is our
standard written warranty. We make no other warranty, expressed or implied.

Model

Serial No.

Date of Purchase

2701 Industrial Drive
P.O. Box 90004
Bowling Green, KY 42102-9004
U.S.A.

For information, write: DESA International, P.O. Box 90004

Bowling Green, Kentucky 42102-9004 U.S.A.

ATTN: Customer Service Department

When writing, always include model number and serial number.

Summary of Contents for BLP35E

















Reviews: