Function of Handheld Transmitter(Microphone in Metal body)
1. Microphone head
2.
ASC sensor
3. LCD display
4. Up/Down key, for changing channel or frequency
5. Handheld mic---Power ON/OFF switch—press it for 5 seconds
Mute—Press it for 3 seconds
Bodypack Transmitter:
ON—MUTE--OFF
6. Battery case: 2pcs of 1.5v AA batteries.
7.
Gain
8.
Microphone Input Jack
--5--
LCD display of transmitter (Microphone)
1. Frequency : indicate the working frequency
2. Channel: indicate the working channel
3. Low battery display: indicate the battery state.
Operating of the handheld transmitter (Microphone)
1. Turn on the transmitter, the LCD display will show the frequency, channel, battery state.
2. If the display show different frequency (channel) with receiver, take the microphone “ASC
sensor” close to the receiver “ASC” window, press the receiver “SET--
▼
” key for 1 second,
check again the receiver and microphone are in same frequency (channel), the RF light on the
front panel of receiver lights, then the system is workable.
BATTERY
1. Screw out the battery case cover, push it out.
2. Put in 2 new 1.5v AA (NO.5) batteries, please make sure the batteries in right
direction.
3.
Push the cover in and make it tighten.
Take off the batteries if not using for long time, the waist batteries must
be take to Recycling Box
.
--6--
