IMPORTANT INFORMATION
Please read all instructions, warnings, and precautions
before use. Correct application is essential for proper
functioning of product.
INTENDED USE
This knee brace provides knee immobilization or
range of motion limitations as prescribed by a medical
practitioner. This brace may be used post-injury, post-
operatively or throughout rehabilitation.
INDICATIONS
Post-operative rehabilitation
CONTRAINDICATIONS
Patients with poor peripheral circulation, diabetes or a
decrease in skin sensitivity should not use this product.
PRECAUTIONS
This product is to be fitted by a physician (or properly
licensed practitioner) who is familiar with the purpose
for which they are responsible. The physician or
practitioner is responsible for providing wearing
instructions and precautions to other healthcare
practitioners or healthcare providers involved in the
patient’s care and to the patient. Follow the instructions
of your physician (or properly licensed practitioner) for
length and duration of use.
INSTRUCTIONS FOR USE
Brace Application - Full Foam
1.
Unhook all clip buckles and
remove thigh and calf wraps.
2.
Apply thigh and calf wraps
with openings toward the
front. Excess wrap material can be trimmed.
3.
Align the hinge of the brace
with the knee joint. The
brace arms will adhere to the
foam wraps. Brace should fit
2” below groin and 2” above
ankle bones. (See Length
Adjustment.)
4.
Fasten clip buckle just below
the knee joint. Repeat with
strap above the knee joint.
5.
Next, fasten the two remaining straps beginning
below the knee then above the knee.
6.
Attach Y-tab closures on strap ends and tighten all
four straps. Straps should be snug but comfortable.
Excess strapping can be trimmed before applying
Y-tabs.
Brace Application – Cool Foam
1.
Unhook all clip buckles.
2.
Align the hinge of the brace with the knee
joint. Brace should fit 2”
below groin and 2” above
ankle bones. (See Length
Adjustment.)
3.
Fasten clip buckle just below
the knee joint. Repeat with
strap above the knee joint.
4.
Next, fasten the two
remaining straps beginning
below the knee then above the knee.
5.
Attach Y-tab closures on strap ends and tighten all
four straps. Straps should be snug but comfortable.
Excess strapping can be trimmed before applying
Y-tabs.
IMPORTANT INFORMATION
Please read all instructions, warnings, and precautions
before use. Correct application is essential for proper
functioning of product.
INTENDED USE
This knee brace provides knee immobilization or
range of motion limitations as prescribed by a medical
practitioner. This brace may be used post-injury, post-
operatively or throughout rehabilitation.
INDICATIONS
Post-operative rehabilitation
CONTRAINDICATIONS
Patients with poor peripheral circulation, diabetes or a
decrease in skin sensitivity should not use this product.
PRECAUTIONS
This product is to be fitted by a physician (or properly
licensed practitioner) who is familiar with the purpose
for which they are responsible. The physician or
practitioner is responsible for providing wearing
instructions and precautions to other healthcare
practitioners or healthcare providers involved in the
patient’s care and to the patient. Follow the instructions
of your physician (or properly licensed practitioner) for
length and duration of use.
INSTRUCTIONS FOR USE
Brace Application - Full Foam
1.
Unhook all clip buckles and
remove thigh and calf wraps.
2.
Apply thigh and calf wraps
with openings toward the
front. Excess wrap material can be trimmed.
3.
Align the hinge of the brace
with the knee joint. The
brace arms will adhere to the
foam wraps. Brace should fit
2” below groin and 2” above
ankle bones. (See Length
Adjustment.)
4.
Fasten clip buckle just below
the knee joint. Repeat with
strap above the knee joint.
5.
Next, fasten the two remaining straps beginning
below the knee then above the knee.
6.
Attach Y-tab closures on strap ends and tighten all
four straps. Straps should be snug but comfortable.
Excess strapping can be trimmed before applying
Y-tabs.
Brace Application – Cool Foam
1.
Unhook all clip buckles.
2.
Align the hinge of the brace with the knee
joint. Brace should fit 2”
below groin and 2” above
ankle bones. (See Length
Adjustment.)
3.
Fasten clip buckle just below
the knee joint. Repeat with
strap above the knee joint.
4.
Next, fasten the two
remaining straps beginning
below the knee then above the knee.
5.
Attach Y-tab closures on strap ends and tighten all
four straps. Straps should be snug but comfortable.
Excess strapping can be trimmed before applying
Y-tabs.
TRANSITION –
Telescoping Knee Brace
Single Patient Use
Rx Only
TRANSITION –
Telescoping Knee Brace
Single Patient Use
Rx Only
2
2
3
3
3
3
4
4
2
2
0-KB7000TelescopingKnee.indd 1
1/21/10 8:06 AM
