QUICK STEPS
SETTING UP
WARNING: Be sure to read all alarm and sensor instructions before use. Test system
to ensure that it is working properly before leaving the patient unattended.
NOTE:
Patient can reset fall monitor by sitting/laying down
on sensor pad.
RESETTING
(Two Options)
1. Connect monitor to pad.*
2. Put pressure on the pad.
3. Wait to hear two beeps.
Select either
“Reset Button ON”
or
“Reset Button OFF”
1. If
“Reset Button ON”
, use the reset button.
2. If
“Reset Button OFF”
, use the Caregiver Key™.
* Pinch the cord together
and route it through the
strain relief recess.
Refer to User Instructions
before changing this setting.
Reset Button-
ON
Reset Button OFF
Use Caregiver Key
To Turn OFF
6V DC
300mA MAX
-
Safety Auto Reset™
Pad
Lost
Low
Battery
Monitor Status
Active When Blinking
Pad and Monitor
Reset
DeRoyal Industries | 200 DeBusk Lane | Powell, TN 37849
888.938.7828 | 865.938.7828 | www.deroyal.com
Rev 01/18 | Reprint # 0-2427
DeRoyal, DeRoyal logo, Improving Care. Improving Business., are
registered trademarks of DeRoyal Industries, Inc.
Caregiver Key, Safety Auto-Reset and Tamper Proof
are trademarks of The Smart Caregiver Corporation.
Copyright© 2018, DeRoyal. All rights reserved.
