-
-2- Operating Manual
Replacement lamps
Please order replacement lamps with order-no. 30030 at www.dermalux-shop.com.
Conducting fluorescence tests
Switch on the unit roughly 15 minutes before the start of training to achieve the optimum
operating temperature and maximum lamp performance. Select a suitable training location so that
the attractive, white fluorescence effect is not impaired by other light sources shining directly into
the unit. Position the unit in as dark a location as possible. The Dermalux® transport and display
case available as an accessory is therefore fitted with a black base insert, for example, for
optimum presentation of the unit. The plate can also be removed and used as a tabletop base for
the unit. To examine hands in the Dermalux® Checkbox, test persons should have their hands in
front of the unit and place them into the lower, large opening on the unit. When moving the hands,
ensure that the fingertips remain at the height of the white mark on the unit. Test persons can
then look through the top viewing slit as marked ("Fluorescence test" sticker).
After tests, we recommend washing your hands.
Warning notes
The unit must only be operated using the power pack supplied (230 V/12 V)
Only lamp type LL8W/BLB should be used
Caution: NEVER switch on the unit without fluorescent tubes!
NEVER clean the electrical components with water!
Do not look directly into the UV light, while operating the device
When inserting and using UV lamps, observe the recommended applications and work
safety regulations
When taking certain medicines such as some antibiotics, or in the case of known
allergies, test persons should obtain further information on whether the skin's sensitivity to
UV could be increased. It is also advisable to seek the advice of a doctor for persons who
have had any cataract operations, for example. In some cases, it may be necessary to
wear UV safety goggles.
Warranties
Six months after date of invoice
Lamps are excluded from the warranty
Repair service
Ingenieurbüro Ott, Auf dem Meer 4, D-56333 Winningen
phone +49 (0) 2606 / 963 28-0
Please contact Mr Ott. Dermalux® equipment can only be repaired at this address.
KBD GmbH - Kaiserstrasse 35 - D-69469 Weinheim - mailto: [email protected] - www.dermalux.de
