6
Charging the battery
Use the charger to charge the battery before using it for the first time. A computer can be also
used to charge the device by connecting them via the USB cable.
•
Connect the USB cable to the USB power adaptor.
•
Plug one end of the USB cable into the device's Charger Port and the other end into an electrical
outlet. The charge time varies depending upon the battery level.
•
Use only
Dermalog
-approved chargers, batteries, and cables. Unapproved chargers or
cables can cause the battery to explode or damage the device.
•
Do not remove the battery before removing the charger. This may damage the device.
•
When the battery power is low, the battery icon appears empty.
•
If the battery is completely discharged, the device cannot be turned on immediately when
the charger is connected. Allow a depleted battery to charge for a few minutes before
turning on the device.
•
If you use multiple apps at once, network apps, or apps that need a connection to another
device, the battery will drain quickly. To avoid disconnecting from the network or losing
power during a data transfer, always use these apps after fully charging the battery.
•
To save energy, unplug the charger when not in use. The charger does not have a power
switch, so you must unplug the charger from the electric socket when not in use to avoid
wasting power. The charger should remain close to the electric socket and easily
accessible while charging.
