Instruction Manual PHOS 20 LED Projector
Wednesday, 08 May 2013
Version 1.4, English
Derksen Lichttechnik GmbH | Sauerlandstr. 5 | 45889 Gelsenkirchen | Germany | www.derksen.de
page 8 of 10
Care to be taken when connecting to the power supply
-
Ensure the voltage of the electricity supply system and the voltage of the machine are
compatible. To this end take note of the typed stickers on the machine.
-
The power cable must not be damaged. Ensure no strain or pressure is put on the cable.
The cable shouldn't be twisted, bent, frayed or clamped. A damaged cable can result in
electric shocks and fires and must be renewed.
-
Only use the machine with a completely closed body.
-
Protect yourself from electric shocks by ensuring the machine isn't used in damp sur-
roundings or near spraying or dripping water.
-
If liquid gets into the machine despite all precautions it must immediately be discon-
nected from the power source. Don't touch the body, the influx of liquid could cause an
electric shock. Don't use the machine again until you're sure it's completely dry.
-
Unplug the machine when it's not being used for long periods of time.
Care to be taken when setting up and operating
-
Only use the supplied glass gobos in the machine. Don't use any other objects or film or
foil materials.
-
Avoid touching the hot projector when it's in use if possible. Switch it off and leave it to
cool for at least 15 minutes before changing a gobo.
-
Don't meddle inside or damage the machine in any way because that would contravene
the safety rules and negate the guarantee.
-
If you hear unusual noises, see smoke or notice a strong smell switch the machine off
straight away and call a service technician. To carry on using the machine could result in
electric shock or fire.
Transport, cleaning & repair
-
Transport and post the machine in its original packing if possible. If that's not possible
you can use a cardboard box with suitable inner protection.
-
Only use a soft cloth to clean the outside of the machine. Don't use any strong cleaners
such as alcohol or petrol and only use recommended optical cleaners to clean the lens.
-
Only a qualified service technician can carry out repairs to the machine and only original
replacement parts must be used.
W
W
