Derksen 20015110, Information For Use

Page: 22 / 44

Se�ngs
En
gli
sh
22 / 44 Derksen Lich�echnik
5. Se�ng up and opera�ng the projector
A few se�ngs s�ll need to be made to the projector head
in order to set up your desired projec�on.
• Carefully remove the shell from the projector head.
Some of the steps below require the projector to be switched on. Op�cal radia�on can cause high temperatures at close
range and may be dangerous for your eyes. Exercise appropriate cau�on. Only switch on the projector once the gobo has
been inserted. Carry out set-up work as soon as possible a�er switching on the device.
5.1. Inser�ng/changing the projec�on
mo�f
1. Loosen the knurled screw.
2. Remove the gobo holder.
WARNING! Risk of burns!
You can burn yourself on projector parts which have become hot.
▶
Let the device cool for at least 10 minutes before any set-up work.
WARNING! Op�cal radia�on hazard!
Op�cal radia�on can cause temporary or permanent eye damage.
▶
Never stare directly into the beam of light.