Instruction Manual GL L60 LED
Version 1.1, English
Monday, 18 April 2011
___________________________________________________________________________
|
DERKSEN USA
|
www.derksen.com
Page
8
of
9
W
Care to be taken when connecting to the power supply
-
Ensure the voltage of the electricity supply system and the voltage of the machine
W
compatible. To this end take note of the typed stickers on the machine.
-
The power cable must not be damaged. Ensure no strain or pressure is put on the
cable.
The cable shouldn't be twisted, bent, frayed or clamped. A damaged cable can
result in electric shocks and fires and must be renewed.
-
Only use the machine with a completely closed body.
-
Protect yourself from electric shocks by ensuring the machine isn't used in damp
surroundings or near spraying or dripping water.
-
If liquid gets into the machine despite all precautions it must immediately be
disconnected from the power source. Don't touch the body, the influx of liquid could
cause an electric shock. Don't use the machine again until you're sure it's completely
dry.
-
Unplug the machine when it's not being used for long periods of time.
Care to be taken when setting up and operating
-
Only use the supplied glass gobos in the machine. Don't use any other objects or
film or foil materials.
-
Avoid touching the hot projector when it's in use if possible. Switch it off and leave
it to cool for at least 15 minutes before changing a gobo.
-
Don't meddle inside or damage the machine in any way because that would
contravene the safety rules and negate the guarantee.
-
If you hear unusual noises, see smoke or notice a strong smell switch the machine
off straight away and call a service technician. To carry on using the machine could
result in electric shock or fire.
Transport, cleaning & repair
-
Transport and post the machine in its original packing if possible. If that's not
possible you can use a cardboard box with suitable inner protection.
-
Only use a soft cloth to clean the outside of the machine. Don't use any strong
cleaners such as alcohol or petrol and only use recommended optical cleaners to
clean the lens.
-
Only a qualified service technician can carry out repairs to the machine and only
original replacement parts must be used.