Shenzhen Dericam Technology Co., Ltd
H502W User Manual
www.dericam.com
11
3. Search equipment and login camera
1). Make sure the equipment is properly connected with the network and power.
2). the router must support DHCP (Dynamic Host Configuration Protocol), because dynamic
IP addresses obtaining is one of the factory settings of camera. If the device cannot get the
correct IP address, it will use the default IP address.
3). the camera cannot be immediately used when power connection is OK, system initializa-
tion will cost more than 20 seconds.
3.1 Search IP camera in LAN
After software installation, please activate the search tools
ipcamtools.exe. When GUI
comes up, please click "refresh" button. The program will search the network cameras, and
display the searched IP address, port number, equipment ID number, P2P ID, device name,
the machine's dynamic domain name, the wireless address and MAC address. An example
is shown as following figure.
