Shenzhen Dericam Technology Co.,LTD
Quick Installation Guide
www.dericam.net
Dericam provide online technical support via email
3
①
Step 1, Mount the WiFi Antenna
Open the package, and take out the camera out of the box carefully and put it on a table steadily,
then take the WiFi antenna, mount it on the SMA connector on the back of the camera, screw the
antenna to the bottom, and make the antenna stand vertically.
Fig.1.1
Mount the WiFi antenna
②
Step 2, Get the camera powered
Connect the power cable to the socket of DC Jack, and get the camera powered.
③
Step 3, Get the camera connected to the router
Use the network cable provided to connect the camera to the router or the switch in the LAN
network at your home or your office.
When configuring the camera for the first time, you need to use wired connection method.
You have to do the wireless connection settings by wired connection before you use
wireless connection method.
①
Step 1,
Insert the Setup CD-ROM into your CD-ROM driver and open it. Close the IE
browser before you install the setup software.
②
Step 2,
Goes to the file”
IP Camera Tool
”
,
and copy the software”
IP Cam Search_en” to
Desktop of your pc, then double click it to open, it pops up a window as below(
Fig.2.1
).
Note
1. Hardware Installation
Start Installation
2. Software Installation
