background image

 

4

 

 

POWER SUPPLY 

 

The SB2003BT can be operated from the following power sources: 
AC: 120V~ 60 Hz   
DC: 4 x 1.5V 

  , battery type R14/ UM-2/ “C” size (not included)   

 

CONNECTING TO AC POWER AND INSTALLING BATTERIES 

1.  Insert the plug of Power Cord into a standard wall outlet with a constant AC power 

supply. 

2.  Install 4 fresh alkaline batteries into the Battery Compartment following the polarity 

diagram inside. Use only the specified size and type of batteries. To open the battery 
door, press on the arrows firmly and then slide downward. 

 

 

 

  IMPORTANT: 

  Be  sure  that  the  batteries  are  installed  correctly.  Wrong  polarity  may  cause 

permanent damage to the unit. 

  For best performance and longer operating time, we recommend the use of alkaline 

batteries. 

  If the unit is not to be used for an extended period of time, remove all the batteries. 

Old or leaking battery can cause damage to the unit and will also void the warranty. 

  Do not dispose of battery in fire. Battery may leak or explode. 

  Battery shall not be exposed to excessive heat, such as sunshine, fire or the like. 

 

CAUTION: 

Danger of explosion if batteries are incorrectly replaced. Replace only with the same or 
equivalent type. 

 

Note:

   

When the unit is plugged into an AC outlet, it automatically switches to AC power source 
even if batteries are installed. 

 
 

LISTENING TO THE RADIO 

 

1.  Use the FUNCTION SELECTOR (#2) to select the AM or FM band. 

1  VOLUME CONTROL 

FOLDABLE CARRYING HANDLE 

2  FUNCTION SELECTOR 

(AM/FM/BLUETOOTH) 

FM TELESCOPIC ANTENNA 

BATTERY AND POWER CORD   
COMPARTMENT 

3  ON/OFF SWITCH 
4  TUNING KNOB 

10 HEADPHONE JACK 

5  SPEAKER 

11 AUX IN JACK 

6  BLUETOOTH

   

INDICATOR 

12 POWER CORD 

Summary of Contents for R-3972T









Reviews: