14
A
UTOMATIC
TRANSMISSION
T
RANSMISSION
COVER
- Remove the seven cover fixing screws.
- Remove the screw and the kick-start.
- Remove the seeger ring and the washer shown in the figure.
- Remove the sector gear.
K
ICKSTART
- Search for excessive wear in the toothed segment, the toothed
segment shaft, the gear shaft and its housing in the crankcase,
and the return spring.
- Replace any damaged part.
- Refit the toothed segment as show in the
figure, pre-loading the spring by hand.
R
EMOVING
THE
ENGINE
PINION
- Using the special tool, retain the engine gear shaft.
- Remove the lock nut and then the gear shaft.
Specific tooling
020288Y Gear shaft retaining tool
- Remove the clutch masses with their gear.
- Remove the two circlips so to free the clutch masses.
- Ensure the teeth are not deformed and/or worn.
ENGINE
EE
ENGINE
K
ICKSTART
R
EMOVING
THE
ENGINE
PINION
