Page 31 of 40
5.3
Washing or replacing the oil mist filter
To wash or replace the oil mist filter, proceed as follows:
-
Switch off the vacuum cleaner and wait for the motors to stop completely
-
Disconnect the vacuum cleaner from the power supply
-
Unlock the hooks securing the head to the filter chamber on both sides
-
With the help of a second person, remove the suction head
-
Lift the oil mist filter holder (E) from the inside of the filter chamber and place it on a work
bench.
-
Remove from the filter cage (F) the oil mist filter sponge (G) and wash it with water. If washing
does not remove the cause of clogging it is necessary to replace the sponge. For greater
convenience, before this operation, it is possible to unscrew the cage complete with mist filter
(F) from the relevant support (E)
Remove the filter, put it in a plastic bag, seal it and dispose of it according to the
legislation in force regarding the type of material extracted
Warning!
Wear appropriate PPE (dust mask, latex gloves, goggles, etc.).
E
F
G