30
5.3
Replacing the oil mist filter
To replace the filter, proceed as follows:
- Stop suction by setting the I/O switch to “
O
”
- Remove the vacuum cleaner plug from power supply socket
- Lock the vacuum using the appropriate brakes
- Disconnect the power cable. Disconnect the tube that connects the motor to the filter
chamber.
- Loosen the hooks (1) that lock the head (2) and lift using the handles, resting on a work
surface, paying attention to not damage electrical cables and tubes attached to it.
Warning!
Wear appropriate PPE (dust mask, latex gloves, goggles, etc.).
1
2
