16
7.1. Insert and Change Inserting Tool
Disconnect screwdriver spindle from power supply before changing or
mounting the screwdriver tool (bit, socket).
IMPORTANT
Use only high-quality inserts (e.g. bits) and connecting components with
external drive E6.3 as per DIN ISO 1173 respectively
external drive E11.2
as per DIN ISO 1173.
You will find suitable inserting tools
in our catalog D3320 or
on the internet as follows:
www.deprag.com
Screwdriving Technology
Selection program: Inserting tools
The screwdriver spindle is equipped with a quick change chuck.
To remove or insert the bit, pull the sleeve into the front.
Push the bit into the hex until it locks.
Let the sleeve snap back.
Drive E 6.3.
Illustration 2 - Insert and Change Inserting Tool
Sleeve
