SecurPhone IP – User Guide
38
4.11. Restore to standard factory settings
You can proceed with total reset operation of the unit, all settings will return to factory
settings, by:
the web interface
: in Admin mode
-
select ‘Management
Upgrade’,
-
click on ‘Reset to factory’ button,
- then the device will be restored and reboot.
the reset key :
It is located on the main PCB inside the unit (see picture page 26).
- press about 20 sec. the reset key,
- then disconnect and reconnect the Ethernet cable (PoE) or the power supply. The
device will be restored and reboot.
Restoring to factory default settings will delete configuration
information of the device (only settings via web interface).
!
