background image

Etension Settings

Login to PBXware web administration interface.

Open a new browser window and enter the IP address in order to access the PBXware web

administration login page. Example: http://192.168.1.10.

Login to PBXware with your e-mail address and password.

Edit extension.

On the Extensions page click on the edit icon corresponding to your extension.

Click on Advanced Options button.

Navigate down to the Auto Provisioning and Presence group of settings.

Make sure Auto Provisioning is set to Yes.

Make sure Presence is set to "Yes".

Click on the Save button to save changes.

Click on Enhanced services.

Click on Directory / BLF List check box and click on Save button in order to enable this

feature.

Click on Directory / BLF List Edit button.

Enter user extension number and click on the BLF check box.

Click on Save button.

Phone Settings

Login to phone web administration interface.

Open a new browser window and enter your phone IP address in order to access the phone

web administration interface login screen. Example: http://192.168.1.22.

Login to phone web administration interface with your username and password. Please note,

factory default login details are username: admin and password: admin.

Click on Function Key on the left navigation menu.

Configure 1 to 8 DSS Keys from the list.

Type: Select Memory Key.
Value: Enter user extension. Example: 1005
Subtype: Select BLF.

Click on Confirm button to save changes.

Retrieved from "http://wiki.bicomsystems.com/Denwa_DW-610P"

Summary of Contents for DW-610P













Reviews: