Denver TSP-303, User Manual, Page: 7 / 156

EN-5
-
Once the power switch is turned to "On",
Bluetooth "BT" mode is set as default
- Blue LED indicator will flash in pairing mode.
The RED LED display will show "bt"
- Turn on the Bluetooth function on your device
and search for " TSP-303 " then press to
connect.
-
Connected sound signal will be heard and
the blue led connection indicator will stop
blinking and stay steady.
-
Bluetooth connection is completed.
-
Select the music from your Bluetooth device
and start playing.
-
Hold the BT DISCONNECT(BT OFF) key to disconnect paired device and enter
pairing mode.
- Press the "Source" Button and select Radio, the FM Radio Frequency will show on
the RED LED display.
- Hold play/pause key to auto search and store.
- Press and hold the TU
or TU buttons for choosing the next stored available
station. Short press them to fine tune.
- Press the "Source" Button and select to
USB, USB will show on the RED LED
display.
- Insert the USB stick.
- Select your favorite music by pressing
TU
or TU .
- Press "REP” to repeat once for the
current song, Press again "REP" to
repeat all songs.
If unit is playing on Bluetooth mode
“BT”, it will automatically switch to
USB mode when the USB stick is
inserted.
Important: The USB port is intended for data transfer only, Other devices cannot be
used with this USB connection. The use of USB extension cords is not
recommended
BLUETOOTH CONNECTION
FM RADIO
USB PORT