¼ ò ½ é
¼ ò ½ é
SETUP
8
Remote Control Battery Installation
4.If you cause a static discharge when touching the
unit, and the unit fails to function, simply unplug
the unit from the AC outlet, wait a few minutes, and
plug it back in. The unit should return to normal
operation.
Requires two AAA batteries(supplied).
Procedure
1. Turn the remote control face down. Remove battery
cover by pressing down on the marking on the
cover and sliding it off in the direction indicated.
2. Install batteries ma) and(-) polarity signs.
3. Replace the battery cover by sliding in reverse until
the lock snaps.
Note: Incorrect installation can cause battery leakage
and corrosion that will damage the Remote
control.
Precautions
Replace batteries in pair.
Do not mix battery types(zinc carbon with
alkaline).
Do not recharge, heat, short-circuit,
disassemble, or burn batteries.
Summary of Contents for TFD-1922
Page 24: ......