English - 3
CD OPERATION (CD-R/RW PLAYBACK COMPATIBLE)
PLAYING COMPACT DISC
GETTING STARTED
NOTE: Should skipping of tracks occur during CD playing try reduce the
volume.
When CD is playing, do not open the CD Door.
1.
Open the CD DOOR by pulling up the CD DOOR. Put a CD into the CD
COMPARTMENT and close the CD DOOR. Set the FUNCTION SWITCH to
“CD” position.
2.
When the CD DOOR is closed with a CD inside, the total number of tracks
of the disc will be shown on the CD LED DISPLAY and will go to “STOP”
mode.
3.
If the CD DOOR is not closed or there has no disc inside, the DISPLAY
will show “
” and go to “STOP” mode.
PLAY/PAUSE MODE
1.
When the PLAY/PAUSE BUTTON is pressed during CD stop mode, the first
track will be played. The PLAY/PAUSE LED INDICATOR will be lighted.
The CD LED DISPLAY will show the specific number of tracks played.
2.
For interruption while the CD is playing, press the CD PLAY/PAUSE
BUTTON once. The PLAY/PAUSE LED INDICATOR will flash continuously.
3.
Though the sound stops, the disc will continue to spin. To re-start
playback, press the CD PLAY/PAUSE BUTTON once again. The music will
start from the exact position where it was interrupted.
4.
To stop the CD, press the CD STOP BUTTON once whether the CD is in
Play or Pause mode.
5.
To turn off the CD, slide the FUNCTION SWITCH to “POWER OFF”
position.
REPEAT MODE
1.
REPEAT 1:
When the REPEAT BUTTON is pressed once, the REPEAT LED INDICATOR
will light and flash continuously. This single track of music will be
repeated.
2.
REPEAT ALL:
When the REPEAT BUTTON is pressed twice, the REPEAT LED
INDICATOR will stay lit. The whole disc can be played continuously.
3.
TO CANCEL THE REPEAT FUNCTION
Press the REPEAT BUTTON until the lighted REPEAT LED INDICATOR is
turned off.
