17
●
While riding, your feet must always be on the foot board.
●
The Electric scooter can accommodate only one person.
●
Do not start or stop abruptly.
●
Avoid riding on steep slopes.
●
Stop riding the Electric scooter if you hit a solid object (such as a wall or other structure) with it.
●
Do not ride in dimly lit or dark places.
●
Ride the Electric scooter at your own risk, we assume no liability for accidents or damage.
●
Ride at a safe speed that allows you to stop at any time.
●
Keep the Electric scooter at a sufficient distance from other people and avoid collisions.
●
Steer through balance shifting, fast movement can result in falls.
●
Do not ride in rain or under other wet conditions. Ride only in dry weather.
●
Avoid riding over obstacles, if possible, and avoid snow, ice, and slippery surfaces.
●
Avoid riding over textiles, small branches, and stones, if possible.
●
Avoid riding in narrow places or in places with obstacles, if possible.
●
Jumping on and off the Electric scooter will cause damage that is not covered by the warranty.
There is a risk of injury. Injuries and damage due to "trick riding" are not covered by the warranty.
●
Stand on the pedal with one foot, push the other foot back on the ground and start sliding. The
motor can only start after the vehicle speed reaches 3km/h.
13.6
Charging
●
Make sure that the Electric scooter, charger, and DC power input of the device are always dry.
●
Note: To charge this Electric scooter, use SOLELY the supplied XHK-800B-4220 charger with the
following output: 42 V -2 A.
●
Using a different charger may cause damage to the device and other potential risks.
●
Use the mains adapter to plug the DC input of the device into a conventional socket.
●
There will be no light on the charger before charging, when connected to e-scooter the adapter will
light red, and charging has started.
●
The red indicator lights up when properly charged; if this is not the case, please check the
connections.
●
Now you can stop the charging cycle. Overcharge shortens the battery life.
●
The charging process takes up to 4 hours. Do not charge the battery for more than 3 hours. After 3
hours, disconnect the charger from the device and the power supply. Overcharge reduces the
battery service life.
●
The product must not be charged over extended periods.
●
Always keep an eye on the device throughout the charging cycle.
