13
1. Battery power display: it shows the current remaining battery capacity.
2. Power off automatically: After the display is idle for more than 5 minutes, the
Electric scooter automatically turns off.
Change display information: When the Electric scooter is on, short press the power
button
, change the showing data on the display, TIME, ODO, DIS and other characters
respectively. When it is showing time, it indicates the running time after switching on.
The time will be cleared after switching off. When it is showing DIS, it indicates the
driving distance after switching on, and it will be cleared after power off. When it is
showing ODO, it indicates the total mileage, which will be retained unless it is manually
cleared.
Change the gear: Short press
▲
or
▼
button to change the gear level (Gear 3 is fast
speed, Gear 2 is medium speed, and Gear 1 is slow speed).
Acceleration: Gently press the accelerator button to speed up (The depth of the press is
related to the gear level you have set).
Deceleration: Gently press the deceleration dial to slow down. The deeper the press, the
greater the deceleration (the deceleration is relevant to the formation of the press, and
pushing too hard can not increase the braking force and may cause damage to the brake
dial).
Clear total mileage: Press
▲
and
▼
buttons at the same time, then press the power
button
to switch on the Electric scooter, and the total mileage will be cleared.
Important: Press
▲
and
▼
buttons at the same time, then press the power button
and select P3 mode, when parameter value is 0, it will start with zero. When parameter
value is 1, it will start with non-zero.
(Zero start: When starting, the Electric scooter in a stationary case, press the accelerator
to start driving.)
(Non-zero start: When starting, the Electric scooter is static, press the accelerator and the
Electric scooter does not work, push the Electric scooter manually to start driving, the
Electric scooter works. factory default is non-zero start. )
You have to manually move the Electric scooter with your foot before the accelerator
button works.
