8
7.
Maintenance
To ensure you get the best possible performance and experience from your electric scooter, it is important to do regular
maintenance for important parts of the product.
●
Battery maintenance
●
Bearings, Screws, Brakes and Wheels
●
Storage and Cleaning
Your electric scooter will require some maintenance so please read and familiarize yourself with this guide.
●
Battery maintenance
All batteries have a life cycle, and performance will decrease over time, however here are some advice to maximize
the life span of the battery.
Make sure that the battery is charged at regular intervals, even if you do not use the electric scooter for a long time. This
is to prevent damage to the battery, caused by low voltage over an extended period.
Avoid draining the battery completely. It is best to charge while there is still power on it. This will extend battery life. If the
battery is constantly depleted, it will damage the battery (damaged battery caused by wrong handling are not covered by
the warranty).
If riding the electric scooter in cold or very hot areas, the battery time can be lower than when riding in temperatures from
15
‐
25° Celsius. This is not a failure on the batteries, but normal behavior.
Please notice: Even a fully charged battery will run out of power if the electric scooter is not used for a period. Expect a
fully charged battery to keep power between 90 and 120 days in off mode, before it is fully discharged. If only partially
charged, this period is lower.
Please make sure the battery does not get above 50° Cels
ius, or below minus 10° Celsius for a longer period. (e.g. don’t
leave the electric scooter in a hot car in summer, do not put battery into fire etc.) Low temperature (e.g. subzero
temperature) can damage the battery cells.
Keep the Electric scooter away from open flame or other sources of heat to prevent the battery from getting too hot. Also
make sure not to leave the electric scooter at freezing temperatures. Both heat and excessive cold can cause the battery
to discharge.
Only use original charger or an official replacement, as different batteries may require specific charger, and if using other
chargers, this could cause damage to the product.
Do not overcharge and discharge the battery.
Please make sure to charge the battery before it is completely out of power, to avoid damaging the battery cells.
(damaged battery caused by wrong handling are not covered by the warranty)
It is forbidden to disassemble battery package. This is only to be handled by official service repair centers and
professionals.
●
Bearings, Screws, brakes and Wheels
Your electric scooter is made up of moving parts, which in time, will be susceptible to wear and tear.
Bearings and screws:
The electric scooter has sealed and dustproof bearings so that no lubrication is required. Check the bearings for wear at
regular intervals to avoid unsafe riding. Do not jump on and off and do not apply excessive force otherwise to avoid
damage to the bearings. This is not a sports electric scooter.
Make sure that all screws are properly tightened to avoid unsafe situations.
Please check the screws regularly and tighten if they seem loose.
Brakes:
Check the brake for wear at regular intervals to avoid unsafe riding. Do not apply excessive force to avoid damage to the
brake.
Wheels:
Check the wheels for wear at regular intervals to avoid unsafe riding.
Electric scooters come with different wheels but can in general be separated into tires with inflatable inner tubes and
solid wheels.
