ENG10
WARNING
●
Please make sure to check that the steering system is correctly adjusted and that all connection
components are firmly secured and not broken before riding, refer to handle assembly and safety
instruction.
●
Please read operation guide and warnings of correct techniques for use and braking
●
Always wear shoes.
●
We highly recommend to always wear helmet/pads for your own protection.
●
Self-locking nuts and other self- locking fixings may lose their effectiveness.
●
All parts and materials of electric scooter cannot be changed, modifications of the scooter are not
allowed. If done, then warranty is void.
●
Storage and cleaning
If your Electric scooter gets dirty, please clean it with a damp cloth only, you may not use pressured water-gun
or running water, as this could damage vital parts. It is also possible to use a little toothpaste if the dirt is stuck.
Remember to clean with damp cloth after this.
Please make sure to keep the electric scooter turned off while cleaning it, and make sure to cover the charging
input to avoid problems with the electronics.
Make sure to dry the scooter with a towel, should it become wet.
Please notice:
Do not use alcohol, gas, kerosene or other corrosive and volatile chemical solvents. This can
damage both the appearance and the internal structure of the electric scooter.
Please store your Electric scooter in a dry and cool environment when not in use. Avoid leaving it outdoors, as
it is not made for storing in wet areas. Nor is it good to expose to high temperatures caused by direct sun for a
long time.
8 Operational control
For better operation, please read the instructions carefully.
8.1 Control and display
Front /Back LED light
Speed
Gear level
Battery level
Cruise control activated
Scooter failure
