background image

 

15

 

 

● 

The Electric scooter can accommodate only one person. 

● 

Do not start or stop abruptly. 

● 

Avoid riding on steep slopes. 

● 

Stop riding the Electric scooter if you hit a solid object (such as a wall or other structure) with it. 

● 

Do not ride in dimly lit or dark places. 

● 

Ride the Electric scooter at your own risk, we assume no liability for accidents or damage. 

● 

Ride at a safe speed that allows you to stop at any time. 

● 

Keep the Electric scooter at a sufficient distance from other people and avoid collisions. 

● 

Steer through balance shifting, fast movement can result in falls. 

● 

Do not ride in rain or under other wet conditions. Ride only in dry weather. 

● 

Avoid riding over obstacles, if possible, and avoid snow, ice, and slippery surfaces. 

● 

Avoid riding over textiles, small branches, and stones, if possible. 

● 

Avoid riding in narrow places or in places with obstacles, if possible. 

● 

Jumping on and off the Electric scooter will cause damage that is not covered by the warranty. 
There is a risk of injury. Injuries and damage due to "trick riding" are not covered by the warranty. 

 

13.6  Charging 

● 

Make sure that the Electric scooter, charger, and DC power input of the device are always dry. 

● 

Note: To charge this Electric scooter, only use the supplied SPC-120WW-546020 charger with the 
following output: 54.6 V -2 A. 

● 

Using a different charger may cause damage to the device and other potential risks. 

● 

Use the mains adapter to plug the DC input of the device into a conventional socket. 

● 

The charging process takes up to 4 hours. Do not charge the battery for more than 4.5 hours. After 4 
hours, disconnect the charger from the device and the power supply. Overcharge reduces the 
battery service life. 

● 

The product must not be charged over extended periods. 

● 

Always keep an eye on the device throughout the charging cycle. 

● 

Charge the device only at temperatures between 0 °C and +45 °C. 

● 

When charging at lower or higher temperatures, there is a risk that the battery performance will be 
reduced. Therefore, there is a potential risk of injuries and material damage. 

● 

Store and charge the device in an open, dry area away from combustible materials. 

● 

Do not charge the device in direct sunlight or in the vicinity of open flames. 

● 

Do not charge the device immediately after use. Allow the device to cool down for an hour before 
charging it. 

● 

If the device is left to other people, it must be charged partially (20 - 50%), not fully. 

● 

Do not remove the device from its package to fully charge it and then put it back in the package. 

Summary of Contents for SEL-10800






















Reviews: