10
Keep the Electric scooter away from open flame or other sources of heat to prevent the battery from
getting too hot. Also make sure not to leave the electric scooter at freezing temperatures. Both heat and
excessive cold can cause the battery to discharge.
Please avoid draining the batteries 100%. It is best to charge them while there is still power on them.
This will extend battery life. Also if riding the electric scooterin cold or very hot areas, the battery time
can be lower than when riding in temperatures from 15-25° Celsius. This is not a failure on the
batteries, but normal behavior.
Do not overcharge and discharge the battery.
Make sure that the battery is charged at regular intervals, even if you do not use the electric scooter for
a long time. This is to prevent damage to the battery caused by low voltage over an extended period.
Please notice:
Even fully charged batteries will run out of power if the electric scooter is not used
for a period of time. Expect between 90 and 120 days in off mode if batteries are fully discharged. If
only partially charged, this period of time is lower.
Please make sure to charge the batteries before they are 100% out of power, to avoid damaging the
battery cells. (damaged battery caused by wrong handling are not covered by the warranty)
It is forbidden to disassemble battery package. This is only to be handled by official service repair
centers and professionals.
●
Maintaining bearings
The electric scooter has sealed and dustproof bearings so that no lubrication is required. Check the
bearings for wear at regular intervals to avoid unsafe riding. Do not jump on and off and do not apply
excessive force otherwise to avoid damage to the bearings. This is not a sports electric scooter.
●
Maintaining wheels
Check the wheels for wear at regular intervals to avoid unsafe riding.
●
Maintaining the brake
The brake pad is made of metal. Check the brake pad for wear at regular intervals to avoid unsafe riding.
Do not apply excessive force to avoid damage to the brake.
●
Maintaining screws and other fasteners
Make sure that all screws are properly tightened to avoid unsafe situations.
●
Please make sure to check that the steering system is correctly adjusted and that all
connection components are firmly secured and not broken before riding, refer to
handlebar assembly and safety instruction.
●
Please read operation guide and warnings of correct techniques for use and braking
●
Always wear shoes.
●
When self-locking nuts and other self- locking fixings may lose their effectiveness.
●
All parts and materials of electric scooter cannot be changed, modifications are not
allowed.
WARNING
