Denver SCK-5300, Original Instruction

Page: 8 / 13

3.
Plug the charger input power into the power socket.
4. The charger indicator is red, indicating that it is charging. When the charger
indicator turns green, the battery is fully charged and after approximately 30 mins
the adapter will stop charging.
5. When the charging is finished, unplug the battery charger from the mains power
supply and from the electric kids scooter and close the charging rubber cover
again.
6.
The electric kids scooter is ready for use.
WARNING:
Do not charge the battery or use the product in the following cases.
-
Giving out some odor or excessive heat.
-
Leakage of any substance.
WARNING:
-
Do not ride the electric kids scooter when charging!
-
It is prohibited to disassemble the battery.
-
Do not touch any substance leaking out of the battery.
-
Do not let children and animals touch the battery.
-
Batteries contain dangerous substances inside. It is forbidden to open the
battery and stick objects into the battery.
-
Use only the supplied charger (HLT-118B-2520900E).
-
Don’t over charge or discharge the battery.
WARNING:
Lithium battery inside!
Regarding battery charging
Important – Please read!
Dear customer. We hope you get a lot of joy out of your new kids scooter.
The battery in these kinds of scooters is not fully charged from production line to avoid
slow charge or damage. When left unused, the battery will slowly discharge.
If you cannot turn on your kids scooter, and it doesn’t seem to charge (the charger light
up green instantly), then please do the following.
1. Leave the charger in for 6-7 hours. This will make sure the battery will be fully
charged again (it can take 3-4 hours before it starts normal charging).
2.
If this does not solve your problem, please ride the kids scooter manually
without turning it on. Use your legs to give speed, for around 100 m, and then connect