SETUP Menu Setting
General Operation
1.Press SETUP to enter the Setup Menu.
2.Press ENTER to
the next level submenu or confirm your
selection.
3.Press to enter the submenu or returen to the previous menu
4.Press to highlight the desired menu.
To exit from the menu
Press SETUP The settings will be stored in the player's memory
even if the player is switched off.
enter
Normal/PS
If you have a normal TV and want both sides of the picture to be
trimmed
or formatted to fit your TV screen.
Normal/LB
If you have a normal TV. In this case , a wide picture with black
bands on the upper and lower portions of the TV screen will be
displayed.
Wide
If you have a wide-screen TV.
16:9
Wide
4:3
Letter Box
4:3
Pan Scan
- - General Setup Page - -
OSD lang
TV Display
Angle Mark
Go To General Setup Page
Captions
Screen Saver
Dolby
General Setup Page
The options included in General Setup page are:" TV Display","Angle
Mark","OSD lang","Captions","Screen Saver".
Follow the steps below:
1.Press SETUP to enter the setup menu.
2.Press to select the 'General Setup page'.
TV Display
Set the aspect ratio of the DVD Player according to the TV you have
connected.
- - General Setup Page - -
OSD lang
Angle Mark
Set TV Display Mode
Captions
Screen Saver
On
ENG
On
On
Dolby
TV Display
PS Normal/PS
Normal/LB
Wide
1.Press to highlight 'TV Display'.
2.Enter its submenu by pressing .
3.Move the cursor by pressing to highlight the selected item.
General Operation&General Setup Page
9
OSD Lang
You can select your own preferred language seetings.This DVD
system will automatically switch to the selected language whenever
you load a disc.If the language selected is not available on the disc,
the disc's default language will be used instead. The OSD language
in the system menu will remain once selected.
1.Press the keys to highlight 'OSD Lang'.
2.Enter its submenu by pressing .
3.Move the cursor by pressing the to highlight the selected item.
4.Select a language and press ENTER.
Angle Mark
Displays current angle setting information on the right hand corner
of the TFT screen if available on the disc.
1.Press to highlight 'Angle Mark'.
2.Enter its submenu by pressing .
3.Move the cursor by pressing to highlight the selected item.
On
:Enable Angle M ark.
Off
:Disable the current angle setting display.
- - General Setup Page - -
OSD lang
Set Angle Mark
Captions
Screen Saver
ENG
On
On
Dolby
TV Display
PS
Angle Mark
On
On
Off
- - General Setup Page - -
Set OSD Language
Captions
Screen Saver
On
On
Dolby
TV Display
PS
Angle Mark
On
OSD lang
ENG
English
French
German
Italian
Spanish
Portuguese
SETUP Menu Setting
General Setup Page