7.
Raise the cue lever to lift the tone arm of its rest. Move the tone arm to the edge of
the record. The turntable starts automatically. Use the cue lever to gently lower the
tone arm onto the record.
8.
Adjust the volume control to the desired level.
9.
When the tone arm reaches the end of the record it automatically returns to the tone
arm rest and the record player stops.
10.
Press POWER again to turn the system off. The POWER indicator goes OFF.
Note: Do not turn or stop the turntable manually. Moving or jarring the turntable without securing the
tone arm clamp could result in damage to the tone arm.
AUX IN OPERATION
Connect the audio system into the AUX IN jack on the rear panel, Press the PHONO/AUX IN button. Start
playing from the connected device.
USB OPERATION
1.
Press the CD/USB button first and the FUNCTION button to enter USB mode. The ‘---‘
and USB icon will be shown.
2.
Insert a USB flash device into the USB socket.
3.
PLAY/PAUSE, DN/UP and stop functions are the same as CD functions.
Note: You may press the FUNCTION on the panel or long press PLAY/PAUSE button on the remote control
for 2 seconds to change the playing mode between CD and USB.
PLAYING IN MP3 MODE (CD/USB)
1.
Press PLAY/PAUSE button to start or pause playback selected track.
2.
While playing the song, the song number and folder number of the selected track will
be shown in the display.
3.
You can stop the playback at any time by pressing the STOP button.
TRACK SKIP AND HIGH SPEED TRACK SEARCH IN CD/USB MODE
During CD/USB playback press UP/F.F (
) or DN/F.R (
) button on the unit front panel or on
the remote control repeatedly to change track. To rapidly search forward or backwards within a track press
and hold UP/F.F (press UP/F.F ( ) or DN/F.R (
) button. To skip 10 tracks back or forth then press
TRACK-10 or TRACK+10 on the remote control.
