English - 2
AC OPERATION
Before operating, please check carefully that the voltage indicated on your
set corresponds to the voltage of your local area.
1.
Plug the AC POWER CORD into a standard AC outlet.
2.
Press the POWER button to start the unit.
POWER/STANDBY LED indicator will light-up to indicate unit is connected
to the power source properly.
SPEAKER BOX CONNECTION
Insert the SPEAKER PLUG of the SPEAKER BOXES to the SPEAKER TERMINAL
on the rear of the unit.
RADIO OPERATION
1.
Slide the FUNCTION switch to the “RADIO” position.
2.
Slide the BAND switch to the desired waveband.
3.
Turn the TUNING knob to your desired radio station.
4.
Adjust the sound level by pressing the VOLUME control knob Up or Down.
5.
To turn off the radio, press the POWER button to “OFF” position.
FM STEREO INDICATOR
Slide the BAND switch to FM ST. position, the FM STEREO indicator will light
when listening to a strong station that is broadcasting in stereo. When the FM
stereo reception is weak, slide the BAND switch to FM position, in this case
this reception will be monaural.
ANTENNAS
For best reception, fully extend the FM Antenna to receive FM stations. For
AM reception, the unit has a built-in antenna, and it may be necessary to turn
the whole unit for best reception.
BASS BOOST
At all volume levels, push the BASS BOOST button to “ON” position to
enhance the low frequency sound. To release the super bass, simply push
this button once again.
MIC JACK
Connect Dynamic hand microphone to MIC JACK for Mic recording.
